(4) Clean the burner by wire brushing (figure 2-3, item 7). Run cleaner (figure 2-3, item 8) by rocking
motion through slots to remove any burned on dirt. Refer to figure 2-6.
Figure 2-6. Burner Cleaning.
(5) Close preheater and generator valves (figure 2-7) by turning clockwise.
Figure 2-7. Closing Valves.
(6) Take burner unit to the fueling area not less than 50 feet away from the lighting and cooking areas.
Place unit on back end in vertical position (Fig. 2-8). Release air pressure by turning fuel filler cap slowly
counterclockwise. After air pressure is released, remove filler cap.