The leveling jacks are heavy and will swing free when the push-lock pins
are removed. To avoid serious injury keep your head out from under the
trailer when lowering jacks.
Two bench levels installed on the fold-down brace not supplied on Penn
Metal's Model MKT-85, Serial No. 328 and subsequent, MKT-90, MKT-
95, and MKT-99
Lower the remaining leveling jacks (1). All four jacks should now be lowered to the ground. Using the
bench level indicators (2) on the corners of the ramp (3), turn the jack handle (4) until the bubbles (5) are
centered. Return the four jack handles (4) to storage, two on each side.