Installing the Overhead Fluorescent Lights. (MKT-99 and MKT-I Improvement Kit)
Position the two overhead lights (1) with the male plug ends (2) facing the front of the MKT.
Mount the first light by wrapping the free end of a light support strap (3) under each end of light (1), on the
rubber end handles (4), over the roof frame (5), through the loop strap fastener (6), and engage the pile
fastener. Wrap the cord (7) around the frame (5) to keep it from hanging.
Mount the remaining light as described for the first light, wrapping the excess cord (8) around the frame
(5) to keep it from hanging. Between the lights, connect the plug (9) of the first light into the receptacle
(10) of the second light.
Wrap the 6 foot extension cord (11) along the frame assembly (5) and above the GFCI outlet located at
the end of the cabinet on the right side of the MKT.
Connect the male plug (12) located at the end second light into the receptacle of the extension cord (11).
Connect the plug (13) at the end of the extension cord (11) into the GFCI outlet (14).