Hang the exhaust fan assembly (1) on the prop rod (2) by engaging the hook-shaped bracket (3) over the
prop rod (2).
Slide a 3-inch hose clamp (4) over one end of the 12 foot long, 3-inch diameter exhaust hose (5).
Install the end of the hose (5) over the exhaust fan hose fitting (6). Use the screwdriver contained in the
field range accesory kit and secure the hose with the 3-inch hose clamp (4).
Wrap the exhaust fan power cord around the hose (5) loosely in order to keep the cord from dangling
down and into the work area.
Guide the loose end of the exhaust hose (5) and power cord over the "U" shaped bar (7) hanging down
from the roof of the MKT. The exhaust hose and power cord combination should drop down past the
cabinet on the right side of the MKT.