REPAIR TENT POLE ASSEMBLY
THIS SECTION COVERS:
Tools and Special Tools
Tool Kit, General Mechanics (WP 0055, Table 2, Item 1)
REMOVE TENT POLE ASSEMBLY FROM TRAILER
Remove nut, screw (1) and adjusters (2) from tent pole (3). Loosen set screws (4) on collar (5) and slide
collar off lower end of tent pole (3).
Slide hand rail sockets (6) off lower end of tent pole (3).
Replace defective parts. Clean and lubricate threads (7) on adjusters IAW WP 0015. Use degreasing
solvent and silicone lubricant.
Install hand rail sockets (6) and collar (5) on tent pole (3). Align collar set screws (4) with locating holes in
tent pole (3) and tighten set screws (4) flush with collar (5).
Install adjusters, screw and nut (1) on tent pole (3).
Install tent pole assembly on trailer.