MOBILE KITCHEN TRAILER (MKT)
DIRECT SUPPORT MAINTENANCE PROCEDURES
REPAIR ROOF VENT AND SCREEN ASSEMBLY
KITCHENS WITH 12 ROOF VENT ASSEMBLIES
THIS SECTION COVERS:
Tools and Special Tools
Table 1, Item 7
Tool Kit, General Mechanics (WP 0055, Table 2, Item 1)
REMOVAL, REPAIR, AND REPLACEMENT OF MAJOR COMPONENTS AND ASSEMBLIES
This section contains the removal, replacement and repair data for all items which are the responsibility of
direct support maintenance. Due to the simple and straightforward nature of the equipment, repair
instructions have also been included rather than putting them in individual chapters.
Roof Assemblies used on models MKT-75, MKT-75A, MKT-82, MKT-85
and MKT-85S are not interchangeable with Roof Assembly used on
models MKT-90, MKT-95 and MKT-99. Failure to comply with this
warning can result in injury to personnel and damage to equipment.
During reassembly use polyurethane sealant, on roof seams. Use
rubber adhesive, to attach roof vent gasket. Use polyurethane sealant,
on new rivet head recesses.
REPAIR ROOF VENT AND SCREEN ASSEMBLY KITCHENS WITH 12 ROOF VENT ASSEMBLIES
Lower roof assembly.
Drill rivets (1) from hinge (2) on roof vent assembly. Raise roof assembly for access to underside of vent
(3) and screen assembly.
Remove vent screen (4) and stay knob (5). Loosen roof vent locking screw (6).
Remove roof cover vent assembly by sliding stay arm assembly (7) from guide stay pivot (8).