TM 9-2330-328-14&P
OPERATION UNDER USUAL CONDITIONS - Continued
0005 00
AFTER USE - Continued
(8) Remove jack handle (9) from the toolbox lid be loosening the wing nuts (10) securing it in place.
9
10
Note
Insure the slots ing the handle support bracket slide under the
retention screws on the frame of the trailer during step 9.
(9) Place the open end of handle U-joint (11) over the jack crankshaft (13).
(10) Insert pin (12) through handle U-joint (11) and jack crankshaft (13) securing them together.
13 11
12
0005 00-18
Change 1