To install the left side section (1) of the cold weather skirt assembly, disengage all elastic cords with "S"
hooks along the bottom of the side panels. Hold one end of the skirt in position to the left of the towing
tongue in the front of the MKT. Engage the quick release clips (2) on the cold weather skirt to the side
panels (3) of the MKT.
Moving from the towing tongue to the left side, temporarily lift the ladder from its position on the MKT and
align the ladder hook grommets on the cold weather skirt with the holes in the deck of the MKT as for the
right side. Once aligned, lower the ladder back into position, placing the ladder hooks through the ladder
hook grommets and into the holes on the deck of the MKT.
Secure each of the quick release clips (3) moving around to the side and rear of the MKT.
When both skirt sections have been installed, secure the hook and pile fastener seam in the rear of the
MKT where the sections meet.
OPERATION IN HIGH WIND.
Install hold down ropes from tent pole tops to ground for added support.
0006 00-3/(4 Blank)