TM 10-7360-206-13
MOBILE KITCHEN TRAILER (MKT)
DIRECT SUPPORT MAINTENANCE PROCEDURES
REPAIR ROOF FRAME ASSEMBLY
THIS SECTION COVERS:
Repair
INITIAL SETUP
Maintenance Level
Materials/Parts
Unit
Tools and Special Tools
Tool Kit, General Mechanics (WP 0055, Table 2, Item 1)
Welding Shop, Trailer Mounted (WP 0055, Table 2, Item 2)
CAUTION
EQUIPMENT DAMAGE
Close all vent assemblies to prevent equipment damage.
NOTE
This procedure requires four men or sling lifting equipment.
Remove attached tentage (1).
Remove nut (2), washer (3), and bolt (4) from cap retaining assembly (5).
Remove corner strut assemblies (6) from roof frame assembly (7).
Remove roof frame assembly (7) with hoisting sling (8) or by utilizing four personnel.
Remove roof vent assemblies (9) as necessary and replace defective components or repair frame in
accordance with welding procedures shown in TC 9-237.
Reinstall roof frame assembly (7).
Reinstall corner strut assembly (6).
Reinstall nut (2), washer (3), and bolt to cap retaining assembly (5).
Reinstall tentage (1).
0045 00-1