TM 10-7310-239-13
and any damage that might cause heat leaks. Be sure
(3) Open oven door, lift up, and pull support
rods (4) from holes in left and rig hand door latches (5
the rod supports (4) are not bent.
(2) Check hinge rod (2) for bends and corrosion.
and 6). This releases the complete oven door assembly
(3).
Be sure hinge rod will turn easily in the hinge brackets.
d. Installation. Install serviceable door assembly
c. Inspection.
b
by
reversing
the
procedure
in
above.
(1) Inspect oven door for dents, corrosion
4-4
