TM 10-7310-239-13
Figure 6-1. Thermometer guard, removal and installation.
(2) Remove rivets (1, fig. 6-7) securing holder
(2) Attach front lift handle brackets (6) to
(2), spacer (3), and shutter (4) to inside wall of burner
bracket plates (5) with new rivets (4). Secure brackets
compartment.
and plates to oven body with new rivets (3). Refer to
b.
Installation
rivets.
(1) Place shutter (4), spacer (3), and holder (2)
(3) Install lift handles and latching pin (para 4-
in position and secure with new rivets (1) by referring to
15 and 4-16).
the proper procedure in paragraph 5-6.
(2). Slide burner unit into burner compartment.
6-8. Replacement of Sliding Shutters
a.
Removal
(1) Slide burner unit (fig. 2-1) from burning
compartment.
6-2
