TM 10-7360-206-13
0013 00
If the heater vent weldment (1) is not already installed, slide the heater vent weldment (1) under the
cabinets (2) on the right side of the MKT so that the end of the weldment (1) that accepts the exhaust
hose (3) is flush with the end of the cabinet (2).
Slide a 3-inch hose clamp (4) over the other end of the exhaust hose (3). Attach the other end of the
exhaust hose to the hose fitting (5) located on the end of the heater weldment (1). Secure the hose clamp
(4).
2
5
1
4
3
0013 00-5
