TM 10-7360-206-13
0013 00
Installing the Griddle with 4 inch flange. To install the griddle with the 4 inch flange, use a second
person and lift the old griddle assembly from above the M2A or MBU burner location. Dispose of the old
griddle in an approved manner. With the help of a second person, lift the new griddle up and into position
over the griddle base. Be sure that the new griddle seats properly over the base.
Replacing the Grease Funnel Assembly. To replace the grease funnel assembly, lift the old assembly
from its location on the right hand side of the griddle. Install the new grease funnel assembly making sure
that it is firmly seated. The new grease funnel must be used with the griddle with 4 inch flange.
Installing the Exhaust Fan Assembly. (MKT-99 and MKT-I Improvement Kit)
The exhaust fan assembly is comprised of 6 components that include the exhaust fan (1) , 3-inch hose
clamp (qty 2) (2,3), 3-inch diameter x 12 foot hose (4), heater vent weldment (not shown), and portable
prop (5).
1
4
3
5
2
0013 00-2
