TM 10-7360-206-13
0025 00
Loosen tie down straps (1) and unroll canopy (2).
Loosen hook and pile flaps and unzip canopy (2) at both ends.
Starting at corner, slide end canopy flaps (3) from end grooves in roof frame assembly (4).
Remove both canopy halves (3) from side grooves in roof frame assembly (4).
Slide end and side travel cover assemblies (5) from grooves in roof frame assembly (4).
Make temporary patches in tentage as necessary. Permanent repairs of tentage should be made at the
Direct Support level in accordance with FM 10-16.
Reinstall side travel cover assembly (5) by threading into side groove.
Reinstall end travel cover assembly (5) by threading into end groove.
Lay side and end travel cover assemblies (5) over roof (6).
Reinstall roof canopy (2) by threading long side into side groove first.
Thread short side of roof canopy (2) assembly into end groove.
Zip (7) two halves of roof canopy assembly (2) together (2 places).
Press hook and pile flaps together, roll canopy (2) up, and tie it with the tie down straps (1).
0025 00-2
