TM 10-7360-206-13
0042 00
Remove rubber gasket (9) from roof cover vent (3).
Remove self-locking nuts (10), clip stay guides (11), and, guide stay pivot (8).
Remove spring pin (12) and stay arm assembly (7) from roof cover vent (3).
Remove spring pin (12) and separate upper and lower stay arms (7).
Remove rivets (1), upper frame (12), and screen holder (13).
Remove rivets and screentab holder.
Make necessary welds and replace defective parts.
Reinstall rivets and screentab holder (13).
Reinstall rivets, upper frame (12), and screen holder.
Rejoin upper and lower stay arms (7) and reinstall spring pin (12).
Replace stay arm assembly on roof cover vent and reinstall spring pin.
Reinstall clip stay guides (11) and guide stay pivot (8) using self-locking nuts (10).
Reinstall rubber gasket (9) on roof cover vent.
Reinstall roof cover vent assembly by sliding stay arm assembly (7) into guide stay pivot (8).
Reinstall vent screen (4) and stay knob (5). Tighten roof vent locking screw (6).
Reinstall rivets (1) on hinge (2) on roof vent assembly.
Raise roof assembly.
0042 00-2
