Appendix D. COMPONENTS OF END ITEM AND BASIC ISSUE ITEMS LIST

TM 10-7360-209-13&P

APPENDIX D

COMPONENTS OF END ITEM AND

BASIC ISSUE ITEMS LIST

SECTION I. INTRODUCTION

D-1.

SCOPE . This appendix lists Components of End Item (COEI) and Basic Issue Items (BII) for the

KCLFF and KCLFF-E to help you inventory items required for safe and efficient operation.

D-2.

GENERAL The Components of End Item List (COEL) is divided into the following sections:

Section II. Components of Find Item. These items, when assembled, comprise the KCLFF and must

accompany it whenever it is transferred to turned in. The illustrations in figure D-l will help you identify these items.

Section III. Basic Issue Items. These are the minimum essential items required to place the KCLFF or

KCLFF-E m operation, to operate it, and to perform emergency repairs. Although shipped separately packed they must

accompany the KCLFF or KCLFF-E during operation and whenever it is transferred between accountable officers. The

illustration m Figure D-2 will assist you with hard-to-identify items. This manual is your authority to requisition replacement

items based on the Modified Table of Organization and Equipment (MTOE).

D-3.

EXPLANATION OF COLUMNS. The following provides an explanation of columns found in the tabular listings:

Column (1) - Illustration. Indicates the Illustration number of KCLFF or KCLFF-E components and

accessories.

Column (2) - National Stock Number (NSN) Indicates the NSN assigned to the item and will be used for

requisition purposes.

Column (3) - Description. CAGEC and Part Number. Indicates the noun name and, if required, a

minimum description to identify and locate the item. The last line for each item indicates the CAGEC (in parentheses)

followed by the part number. If the item you need is not the same for different models of the equipment, a usable on code

will appear on the right side of the description column on the same line as the part number. These codes are identified

below:

Code

Used On

BLANK

BOTH

EDE

MIL-K44156 Type I (KCLFF)

FHE

MILK-44156 Type II (KCLFF-E)

Column (4) - Unit of Measure (U/M).

Indicates the measure used in performing the actual

operational/maintenance function. This measure is expressed by a two-character alphabetical abbreviation (i.e., ea, in,

pr).

Column (5) - Quantity Required (Qty Rqd). Indicates the quantity of the item authorized to be used with/on

the equipment.