TM9-2330-328-14&P
MAINTENANCE OF AIR BRAKE SYSTEM - Continued
0016 00
BRAKE AIR CHAMBER - Continued
(6) Loosen nut (7) and remove push rod end (6) and nut from push rod.
(7) Uncage air chamber (WP 0006 00-3).
b. Installation.
(1) Install nut (7) and push rod end (6) on push rod.
(2) Cage new brake chamber (WP 0006 00-3).
(3) With brake air chamber spring caged, measure length of push rod. Length should
be 7 inches.
(4) If push rod length is not 7 inches, loosen hex nut and turn push rod end on or off
push rod to adjust length. Tighten hex nut against push rod end to 15-25 lb-ft.
1
2 3
4 5
6
7
8 9
10
