TM 10-7360-206-13
0032 00
NOTE
When replacing corner ramp section, place side ramp section in lowered
position to allow access to retaining pins.
NOTE
Each side ramp section has three leveling devices.
Rear ramp sections contain mounted hardware for fuel can assemblies.
RAMP ASSEMBLY
Place ramp sections in upright position.
Remove bolt handle (1) from latch slide assembly (2) and slide bolt (3) from housing (4).
Remove bolt handle (1) from bolt (3) and slide bolt from housing.
Remove mounted hardware (5).
Replace defective parts.
Reinstall mounted hardware (5).
Slide bolt (3) back into housing and reinstall bolt handle (1).
Reinstall pins (1), washers (2), and cotter pins (6) in ramp sections.
6
5
2
1
4
3
0032 00-5
