TM 10-7360-209 -13&P
b.
Removal
1.
Loosen the eight hex nuts from studs and remove.
2.
Remove eight lock washers from studs.
3.
Remove the Table Leg Assembly by lifting entire assembly
o f f t he studs.
c.
Replace
1. Align the eight holes on the table leg assembly on to the
e i g h t studs on the bottom of the table.
2.
Replace the eight lock washers on the studs.
3.
Replace the eight hex nuts on the studs and tighten.
4-11.
DISPENSER, LIQUID, INSULATED
Vent Cap
a.
Remove
Remove vent cap form Iid.
b.
Replace
I n s t a l l vent cap on lid.
4-9