TM 10-7360-209-13&P
b.
Replace
1. Install spout (1) and O-ring (2) from the inside through dispenser wall.
2. Replace hex nut (3) and tighten.
3. Install wig nut (4) and 'Co nut (5).
4
Install silicone rubber seal cup (7) and install top (6) on faucet (8) and tighten.
5. Install faucet (8) to spout(l) and tighten wing nut (4).
4-12. FOOD CONTAINER, INSULATED.
Food Container Gasket.
a.
Removal
Open the insulated food container cover and pull off the gasket from the container body.
a
Replace.
Install new gasket on the insulated food container.
Insert Seal
a.
Removal
Remove the insert lid and remove the seal from the insert.
