TM 10-7360-209-13&P
DIRECT SUPPORT MAINTENANCE INSTRUCTIONS
Section I. GENERAL
5-1. SCOPE OF DIRECT SUPPORT MAINTENANCE. D i r e c t support maintenance identified
in appendix B consists of repairing or replacing components that are riveted or
welded. Refer to TM 9-450 for information on metal body repairs. Direct support
maintenance of the M2 Burner Unit is covered in TM 10-7360-204-13&P.
S e c t i o n II.
DIRECT SUPPORT MAINTENANCE PROCEDURES
5-2.
RIVET REMOVAL.
Remove rivets as shown below:
When removing rivets, do not increase the size of the
o r i g i n a l rivet hole so that the original rivet requires
r e p l a c e m e n t with a larger rivet.
