TM 10-7360-209-13&P
b.
Replace
1. Measure, cut and miter to size gasket bulk material
2. Drill screw holes in gasket (Figure G-l, appendix G).
3. Apply vinyl cement (Item 5, Appendix F) to gaskets (3) and (7) miter joints and between gaskets (3) and
(7) and lid bottom making certain that the complete width of flange is covered with cement.
4. Install gaskets (3) and (7) on lid bottom Ensure vinyl cement is thoroughly dry before installing retainers
5. Install two long gasket retainers (6) and secure 22 slotted screws (5).
6. Install two short gasket retainers (2) and secure with 22 slotted screws (1).
Drain
a.
Remove.
1.
Remove drain hose (1).
2.
Unscrew plastic elbow (2) and washer (3) from bottom of ice chest (4).
b.
Replace.
1.
Assure that the dram hose (1) and plastic elbow are clear of obstructions.
2.
Install plastic elbow (2) in bottom of ice chest (3). Hand tighten.
3.
Replace hose (1) on elbow (2).
Change 3 4-13
