TM 9-2330-328-14&P
OPERATOR MAINTENANCE PROCEDURES - Continued
0012 00
WHEEL AND TIRE - Continued
LOCATION
ITEM
ACTION
7. Hub (1)
Outer wheel (2)
Place in position.
Position inner and outer valve stems 180
degrees apart (7).
8. Hub studs
Eight capnuts (3)
Using wheel socket, install.
Tighten using illustrated tightening sequence.
9. Axle (4)
Wheels and tires
Using hydraulic jack (6), lower.
(2 and 5)
Remove jack.
10. Outer wheel (2)
Eight capnuts (3)
Using wheel socket and illustrated tightening sequence,
retighten.
NOTE
Have Organizational Maintenance torque capnuts using torque wrench to 190 to 210 ft. lb (258 to 285 Nm).
7
Change 1
