MWO 10-7360-206-30-1
Item 28, Qty. 1,
Hold down bar
9. SPECIAL TOOLS; TOOL KITS; JIGS; TEST MEASUREMENT AND
DIAGNOSTIC EQUIPMENT (TDME); AND FIXTURE REQUIRED:
or hole saw for drilling aluminum plate, and cutting fluid for aluminum.
10. MODIFICATION PROCEDURES:
WARNING. Wear safety shatterproof glasses or goggles
when drilling under the Trailer
platform deck and the storage cabinet.
a. Modification of the storage cabinet.
1) Drill 1-3/8 inch holes in the three aluminum panels of the storage cabinet. Refer to
the hole location in each panel and insert a grommet (Item 13) into the holes in panels 1
and 2.
5