MWO 10-7360-206-30-1
2) Drill a 1 - 3/8 inch hole in the aluminum platform deck in the position shown in
Front of MKT
Front edge of platform
Condiment Cabinet
Edge of platform
Drill, 1 3/8 inch hole and
insert grommet (Item 12)
Figure 5. Location of cable pass through hole in platform near condiment cabinet.
3) Gain access to the platform deck inside the storage cabinet by opening the cooling
cabinet door. Drill a 1-3/8 inch hole in the aluminum platform deck in the position
shown in Figure 6. Use reference dimensions from the storage cabinet frame to position
the hole. NOTE: If the storage cabinet is removed, use the alternate dimensions from the
the hole.
8
