MWO 10-7360-206-30-1
Hold down bar (item 28)
5/16 X 18 wing nut (item 15)
and flat washer (item 14)
Approx.
Carriage Bolt
(item 22)
5/16 X 18 UNC nut
(item 16)
Power converter
bracket (item 27)
2) Install the power converter hold down bar (Item 28) onto the carriage bolts and
capture it using one flat washer (Item 14) and a wing nut (Item 15).
3) Place the power converter bracket assembly inside the storage cabinet.
4) Install the power converter bracket according to Figure 11.
Front edge of platform
Storage Cabinet Frame
Attach power converter bracket (item 27)
to MKT platform with
eight, self drilling screws (item 23)
and eight, #8 flat washers (item 25)
f. Feeder cable harness assembly.
12
