TM 10-7360-206-13
MOBILE KITCHEN TRAILER (MKT)
DIRECT SUPPORT MAINTENANCE PROCEDURES
DIRECT SUPPORT MAINTENANCE INSTRUCTIONS
Overview
This chapter provides all of the instructions necessary for performing direct support level maintenance on
the kitchen. The procedures in this section should not be attempted at any other maintenance level.
REPAIR PARTS, SPECIAL TOOLS, AND EQUIPMENT
Repair Parts. Repair parts are listed and illustrated in TM 10-7630-206-23P.
Special Tools And Equipment. There are no special tools or equipment required or authorized for direct
support maintenance personnel to maintain this equipment.
TROUBLESHOOTING PROCEDURES
GENERAL.
There are no troubleshooting procedures at this level of maintenance.
GENERAL MAINTENANCE.
General. This section contains instructions for performing maintenance on all items which are the
responsibility of direct support maintenance personnel.
GENERAL REPAIR INSTRUCTIONS
All procedures are in disassembly/assembly sequence. Only disassemble an item as far as necessary to
repair it, then locate the appropriate point in the assembly sequence and reassemble the item.
All repairs shall be made in a workmanlike manner. Scratches, toolmarks, abrasions, scores, dents and
distortion of the repaired area are unacceptable.
Aluminum alloy surfaces having protective coating chipped off, scratches, or worn spots which expose
surface of the metal should be recoated at once as corrosion may develop rapidly.
While an injury to the skin covering caused by impact with an object is plainly evident, a defect such as
distortion or failure of the structure may not be apparent until some evidence develops on the surface.
Check for evidence of canted, buckled or wrinkled covering, and loose rivets or working rivets.
0040 00-1
