TM9-2330-328-14&P
MAINTENANCE OF ELECTRICAL SYSTEM
COMPOSITE LIGHTS
Materials/Tools
General mechanics tool kit
a. Removal.
(1) Tag and disconnect connectors (1) from wiring harness.
(2) Remove two cap screws (3) and lock washers (2) to detach each composite light.
Remove light.
b. Repair.
(1) Loosen captive screws (7) and remove lens (8).
NOTE
Do not remove o-ring (9) unless damaged.
(2) Replace any defective lamps (5, 6 and 10).
(3) Install new o-ring (9) if it was removed in lens (8) and fasten unit to body (4)
with captive screws (7).
c. Installation.
(1) Install composite light on trailer with two cap screws (3) and lock washers (2).
(2) Connect connectors (1) to wiring harness. Make sure that tag or marker numbers on wires
correspond.
3
4
2
5
6
1
7
8
9
10