TM 9-2330-328-14&P
MAINTENANCE OF ELECTRICAL SYSTEMS- Continued
0015 00
WIRING HARNESS - Continued
(2) If individual harness wires extending from the harness loom are broken, cut off defective
piece of wire and splice on new length of wire. Install new terminal (1) and shell (2) to new
wire (step 1).
(3) If wire leads have damaged insulation, tape over damaged insulation where required. If
wires within the harness loom are defective, replace wiring harness.
d. Installation.
CAUTION
Do not damage wiring or insulation during installation of wiring harness.
Feed wiring harness (3) through the clamps (5) on frame.
5
5
4
1
2
3
4
5
5