TM9-2330-328-14&P
MAINTENANCE OF ELECTRICAL SYSTEMS-Continued
0015 00
WIRING HARNESS - Continued
(1) Run wiring harness (3) along frame and through clamps (5) as shown. Run
harness over cross beams and inside of main beam. Run rear of harness through clamp
(5).
(2) Position ground connection (4) on frame. Connector must have a contact. Install lock
nuts. Be sure ground lead is under one of the lock nuts.
(3) Connect connectors (1 and 2) to all lights.
(4) Connect to towing vehicle and check operation of all lights.
(5) Replace electrical connection cover plate at front of trailer.
5
5
4
1
3
2
4
5
5
